The ID switch must be set to the correct values to identify the components on the serial 'PACE-Bus' (RS485). The ID must be unique on one 'PACE-Bus' (RS485).
The ID switch 1 and 2 are used to set the RS485 address. The ID switch 3 to 8 are reserved for future application and should stay in the OFF position.
1 | 2 | ID |
---|---|---|
0 | 0 | 10 |
1 | 0 | 11 |
0 | 1 | 12 |
1 | 1 | 13 |
- 0 = OFF
- 1 = ON