In addition to adding data points and styles to a trend, you can also perform the following editing tasks:

  • Edit the trend name.
  • Remove or delete a data point from the trend chart.

To edit a Trend

  • Prerequisite: There is a trend analysis in the Trend Analysis tab of Operations Manager.
  1. Select the trend.
  1. Select Edit.
  • And then, complete the following editing procedures below as needed:

 

Add / remove a data point from an existing trend chart

  1. From the Edit trend dialog box, select Add data points.
  1. From the Select data points dialog box, and do the following:
  1. To add data points to the trend:
    a. From the Available section, check the boxes next to the data points you want to add.
    b. Click to move them to the Selected section.
  1. To remove data points from the trend:
    a. From the Selected section, check the boxes next to the data point you want to remove from the trend.
    b. Click to move the data point to the Available section.
  1. Select Confirm.

 

Delete a data point from a trend

If a data point is removed in Building Operator Discovery that is also in a trend analysis chart, then the trend analysis still displays the data point in the configuration, however, no data is plotted on the chart for the data point.

  1. From the Edit trend dialog box, go to Series.
  1. Select the data point to delete.
  1. Select Delete.
  1. Select Save.

 

Edit a trend name

  1. From the Edit trend dialog box, select Options.
  1. In the Title field, type the new name for the trend.
  1. Select Save.

 

Rename a data point

You can use up to 100 characters while renaming the data points.

  1. From the Edit trend dialog box, go to the Series tab.
  1. Select the options menu in the row of the data point you want to rename, and then select Rename.
  • A blue border displays around the data point field.
  1. Enter new data point name in the data point field.
  1. Select Save.
  1. Before saving, if changes are not required, select and then select Discard changes.
  • The name of the data point as it appears on the trend is changed.