The inputs, outputs and parameters of an application can be influenced in various ways. These are identified by the following symbols in this document:
ETS
Parameters identified by this symbol are set using ETS.
ACS
Parameters identified by this symbol are set using the ACS tool.
Note!
Setting RDF KNX parameters is only supported by the following tool versions:
ETS3 or higher
ACS version 5.11 or higher
Inputs and outputs identified by this symbol communicate with other KNX devices.
They are called communication objects (CO).
The communication objects of the RDF KNX thermostats work partly in S-Mode, partly in LTE Mode, and partly in both. These objects are described accordingly.
A list of the parameters is shown in section 3.13.