Parameter settings in ETS - Basic Documentation - RDF600KN - RDF600KN/S - RDF600KN/VB

Semi-flush mount room thermostats with KNX communications RDF301, RDF301.50, RDF301.50H, RDF600KN, RDF600KN/VB, RDF600KN/S

Product Family
Desigo Open
Desigo PX Open
Product Group
Building automation
Thermostats (temperature controller with sensor)
Content Language
English
Content Type
Technical Documentation > Basic Documentation
Product Version
Status
Valid
Date
2020-02-21
Document No
CE1P3171en
Download ID
A6V10385333
Stock No.
S55770-T293
S55770-T400
S55770-T430
Product No.
RDF600KN
RDF600KN/S
RDF600KN/VB
Access level
Internet
File Type
html

For setting the parameters, open the project and select a device.

To start the parameter settings, select Edit, then Edit parameters.

Note:

  • The ETS version 3f or higher can be used to assign the communication objects to group addresses (S-Mode).

  • The ETS4 or higher can be used to download the application and parameters.

The application (plant type) and Control Sequence can be adjusted and down­loaded.

The control parameters, ([Pxx] description) can also be adjusted and down­loaded. Refer to section 3.13.