The thermostats consist of 2 parts:
Front panel with electronics, operating elements and built-in room temperature sensor.
Mounting base with power electronics.
The rear of the mounting base carries the screw terminals.
Slide the front panel in the mounting base and snap on.
|
1 Operating mode selector | ||
2 Button for fan operation | ||
3 Buttons to adjust setpoints and control parameters | ||
RDF301.50, RDF600KN/S | 4 Four buttons to control KNX actuators via KNX S-Mode (functions: switching, dimming, blind control, 8-bit scene) |
|
RDF301.50H | 5 Four dedicated buttons for hotel functions (Make Up Room, Do Not Disturb) via KNX S-Mode (functions: switching) |
For operation, refer to section 4.3 Operation.