ETS is an engineering tool. It can be used for the full commissioning of the RDF KNX thermostats.
The following functions can be realized with ETS4:
Define and download the physical address
Define and download the application (plant type, control sequence)
Set up and download the thermostat's control parameters
Download the switching group parameters (RDF301.50, RDF600KN/S)
Set up and download group addresses.
This basic documentation does not describe how to operate ETS and commission a device. Refer to the KNX Manual for more details.
Setting RDF KNX parameters is only supported by ETS4 or higher.
ETS4 can be updated online.