The thermostats support the following applications, which can be configured using the DIP switches inside the front panel of the unit or a Modbus commissioning tool.
Remote configuration
All DIP switches need to be set to OFF (factory setting) to select an application via commissioning tool.
| Remote configuration, via commissioning tool (factory setting) | DIP switches
|
See also…
section 3.4.1 “Applications for fan coil systems”
section 3.4.2 “Applications for universal systems”
section 3.4.3 “Applications for heat pump systems”
section 3.6.5 “Universal applications”
section 3.6.6 “Compressor applications”.