The Maintenance section contains functions to download log files, back up and restore device settings, restart, or change device operation mode. Most operations require administrator access.

Log files

The Connect gateway keeps several log files for different purposes. The log files can be retrieved and downloaded in encrypted format from the GUI section Maintenance.

  • Application log files ("applogs")
  • Diagnostic data
  • Device settings

The audit log files contain activities and events in JSON format and can be retrieved from Security > Overview. The application logs and diagnostic data are not intended for operational use and are therefore protected by encryption. The files are used by Siemens support.

Back up and restore

Two buttons are designated for back up and restore of device settings. A downloaded, already encrypted and password protected settings file can then be stored in a safe location. When selecting Back up device settings, a password to protect the file is requested.

The password has to conform to the general password guidelines and the minimum password length set in the device. The same password will be used to restore the settings.

The button Restore device settings displays a dialog for uploading of an encrypted settings file and requesting the same password assigned to it at download.

Additional buttons are available to perform device operations:

  • Restart applications - restarts all applications running on the device.
  • Restart device - performs a device reboot and restarts running applications.
  • Reset to factory settings - initiates a factory reset, (see also Factory reset.
  • Reset configuration - similar to factory reset but maintains the registration status of the device in the cloud: after configuration reset, the device can still connect to the cloud.