WARNING
DC 24 V = ONLY (direct current)
Current 1.8 A
Typically 13 W
Before connecting the Connect X300, make sure that the following pre-requisites are met:
- DC 24 V ± 20 %, Security extra low voltage SELV according to IEC/EN / DIN EN / UL 60950-1
- Power Supply: NEC Class 2 or LPS according to IEC/EN / DIN EN / UL 60950-1
- Switch the power supply to the OFF position.
- Connect the protective ground.
- Connect the power supply.
See Connection terminals and LED indicators for information on LED behavior during commissioning.