Set up a plant notification as end user or installer for your own or a customer plant.
The notification types "Alarm" and "Report" are available as a rule.
You receive an alarm notification in the event of a plant fault.
You receive reports on invoicing, if you have created a corresponding alarm notification with type "Report".
You receive reports on trends (trend files), if you have selected "Trend file" on the M-bus web server and set a timeframe in the future for evaluating the meter data. A trend file is sent to the Synco IC cloud as soon as the web server creates a trend over this timeframe.
Additional information on trend file settings is available in the M-bus web server user's guide (Document A6V11157985), see "Reference documentation".
Trend tiles are sent only one time to the cloud. The selection "Trend file" must be selected each time to send additional trend files and a timeframe in the future set for evaluating meter data on the web server
For information on basic data for plant notifications (alarms and reports), see Section "Basic data".
Information on alarm messages in available in Section "Alarm-specific settings".
Information on the reports (billing and trend files), is available in Section "Report-specific settings".
The function "Set up plant notifications" is based on the plant role.
In the tenant area "Siemens Metering", you can set up a plant notification with all roles with the exception of "Owner".
In the tenant area "Siemens Proxy", you can set up a plant notification with all roles.
Additional information on switching the tenant area is available in Section "Switch tenant".