All existing settings are deleted and reset to the factory settings.
1 |
Internal alarm indicator |
2 |
'new' opening with button |
To create the factory settings on the radio fire detector, proceed as follows:
- The radio fire detector is being supplied with power.
- You have a slim pen or pencil to hand.
- Remove the radio fire detector from the detector base.
- Wait until the internal alarm indicator (1) flashes green (2-second interval).
- The detector is 'out of base'.
- Press the pen or pencil into the 'new' opening (2) for 5 seconds.
- The internal alarm indicator flashes red (2-second interval).
- The radio fire detector is set to the factory settings.