Service button (rear side) (Only for devices with series B and higher, see printing on the device) - Data Sheet - PXA.S30 - PXA.V40 - PXA.V50 - PXM30-1 - PXM40-1 - PXM50-1

Short

Physical identification on the network (Ethernet)

As per description

Do the following to reset the device to factory state:

1. Power off the device.
2. Power on the device.
3. Wait until the LED lights up and turns off again, then press the Service button.
4. Keep the Service button pressed until the LED lights up again, then release the button.
5. Wait until the device has fully started – unconfigured (LED flashes red/green)

Pre-loaded apps are still available. The FW remains unchanged