Operating mode overview

You can manually switch to the following operating modes on the thermostat or in the mobile application.

Operating mode

Description

At home

You can use this mode when you stay at home or inside the room where the thermostat is located.

When the thermostat operates under this mode, you can toggle to to let the thermostat run automatically following a schedule, or toggle to to let the thermostat operate at a specified setpoint permanently. See Thermostat display overview for more detailed information about how the thermostat works when or is toggled on.

AWAY

This mode helps save energy. You can use this mode when you are away from home or outside the room where the thermostat is located.

The temperature setpoint maintained under this mode is the same with that scheduled in “Unoccupied” mode using the mobile application. Deactivation of this mode switches the thermostat to the schedule you’ve set (if you haven’t set one, the thermostat works following a default schedule).

HEAT ()

Puts thermostat and the controlled heating system into Heating only operation.

OFF

You can use this mode to save energy when the space is not occupied for a long time, for example, when you are taking a long vacation.

Depending on how you’ve set up the thermostat, this mode can mean one of the following:

  • Your heating equipment turns off completely.
  • Your thermostat only works to maintain the system’s protection setpoint so that your heating equipment is not destroyed if the room air temperature is too low, or if the air is too humidified or dry. For more information about the protection setpoint, see Managing application settings.

Deactivation of this mode switches the thermostat to the schedule you’ve set (if you haven’t set one, the thermostat follows a default schedule).

Switch between “At home” and “AWAY” modes

  • On the Home screen, tap to switch from “At home” to “AWAY”.
  • Tap to switch from “AWAY” to “At home”.
  • If you want to do it from the mobile application, see Switching between "Away" and "At home".

Switch between “HEAT” and “OFF” modes

  • On the Home screen, tap , and then tap “OFF” or “HEAT ()” on the “Operating mode” page.
  • If you want to do it from the mobile application, see Switching between heating and OFF modes.

NOTE: To awake your thermostat from the “OFF” mode, tap the thermostat screen or switch back to “Heat” in the mobile application.

Change the thermostat behavior under the “OFF” mode

  1. On the Home screen, tap , then tap and .
  1. When prompted, enter the administrator password.
  1. Tap > , and then tap “Off/protection configuration”.
  1. Tap either “Off” or “Protection”.