The DS11i line is started as an FDnet line. Then the topology is determined on the current line. This procedure finds and displays only FDnet-capable devices.

Use this function only to determine whether the line has a valid FDnet topology or to determine all connected FDnet devices.

NOTICE! For DS11i lines, never use the standard read-in function. The high line voltage can damage DS11i devices.

The function 'DS11i Migration: Start Mixed Line Scan' is supported only by FDOOT241-A5.

'Start Mixed Line Scan' permits fault detection to only a reduced extent. Among other considerations, input errors are not localized and leakage currents are not detected.