Configuring the SLX 9000 Firewall

Configuring the SLX 9000 Firewall - Start-up

N4 SLX 9000 Start-up

Content Language

English

Content Type

Technical Documentation > Quick Guide

Document No

A6V15372363_en_a

Download ID

A6V15372363

Access level

Internet

File Type

html

Configuring the SLX 9000 Firewall

When shipped, a new controller is pre-configured with an IPv4 address in the range: 192.168.1.140 with a primary LAN1 port. Its LAN2 port is disabled.
The unit’s default subnet mask is: 255.255.255.0. You change these IPv4 network settings during your startup commissioning of the controller.
When shipped, the controller’s, platform daemon is configured to listen on HTTPS port 5011. Often, this is left at default. However, if a different port is needed for a platform connection, perhaps for firewall reasons, you can change this during the commissioning of the controller.