• A test plan in the Open state is available.
  • A device hierarchy is available with zone, device, and address information.
  1. Select a site and then select Test plans on the vertical navigation and then select the test plan in open state.
  1. Select the checkbox for the devices that are faulty and select the device entry.
  • The Edit device details dialog box displays.
  1. Enter the following data in the Edit device details dialog box:
  • Select the corresponding state from the Status drop-down list box: (4)
    - Pass (cannot be selected. The information is updated as part of the synchronization with the fire control panels)
    - Failed
    - Skipped
    - N/A
  • Select any of the following comments in the Comment drop-down list if Skipped is selected as the status. (5)
    - Room locked
    - Not accessible
    - Skipped at customer request
    - Other
  • Select any of the following comments in the Comment drop-down list if Failed is selected as the status. (5)
    - Device did not work
    - Damaged or dirty
    - Other
  • Select Cannot be tested in the Comment drop-down list if N/A is selected as the status. (5)
  1. Select Save. (6)
  • The device is tested and includes a comment.
  1. Edit the other devices on the test plan list.