On the Device Configurator page, right-click on an Ethernet port to configure the IP parameters of the controller. See the following table for details:
Parameter | Description |
|---|---|
DHCP Enable | Enables (default) or disables the DHCP function. |
IPAddr | IP address of the controller. Disappears if DHCP is enabled. |
NetMask | Subnet mask of the controller. Disappears if DHCP is enabled. |
DefaultGateway | The default gateway address of the controller. Disappears if DHCP is enabled. |
MODBusTCPPort | The Modbus TCP port of the controller. The default value is 502. |