You can download and run a program on a physical device after the controller and extension module are configured, programmed and compiled successfully:
- Right-click the physical device and click "Download and Restart(lock)".
- You can view the download progress in the progress bar in the lower left corner of Logic Manager Programming Tool. On restart, the connected devices under "Device Connect" disappear from the corresponding NIC temporarily. They appear again after the restart is complete and network is established. Tip: The RUN LED turning to solid green indicates the restart is complete.
NOTICE
If you need to download the programming file compiled in the tool version V1.0.x to a real device for simulation or commissioning in V2.0.x, recompile it to avoid simulation or commissioning errors.