You can do the following on the plug:
- Add the plug to the hub after the mobile application initiates the joining process.
- Reset the plug to factory settings.
See LED indication for information on the above operations. Other operations, such as assigning the plug to a room and viewing monitoring records on plug on/off status, are only available in the mobile application.
Switching the plug state (ON and OFF) can be done either on the device or through the mobile application. However, frequent switching is not recommended as the device and mobile application might not be synchronized in a timely manner.
NOTICE
After a firmware upgrade or reboot, the plug turns OFF. To use it again, you need to turn it ON either through the mobile application or on the device once the upgrade or reboot is complete.