CAUTION
Incorrect wiring or operating outside specifications

Risk of device damage and other hazards

  1. Use only qualified personnel to install the device.
  1. Ensure that the device is wired correctly before turning on power.
  1. Operate the device within the specified operating ranges (temperature, humidity, voltage, shock, mounting direction, atmosphere, etc.).
  1. Use only for the intended purpose of monitoring and control.
  1. Operate inside only.
  1. Do not operate over a power-over-ethernet (POE) network. Connecting the device to a network segment supplying power may cause a device failure. In this case, disconnect the device from the POE network segment, turn it off and on again.
WARNING
Improper device handling during installation, maintenance, and mounting

Risk of electric shock!

  1. Always disconnect the power supply before installation or maintenance.
  1. Turn off power before wiring, removing, or mounting the device.
  1. Do not touch electrically connected parts, such as power terminals.
  1. Do not disassemble the device.
  1. Keep out of reach of children.
  1. Install the device in a controlled environment relatively free of contaminants.
WARNING
Operating outside specifications or loose electrical wires

Risk of fire!

  1. Operate the device within the specified operating ranges (temperature, humidity, voltage, shock, mounting direction, atmosphere, etc.).
  1. Tighten the electrical wires on the connector.
  1. Install the device in a controlled environment relatively free of contaminants
CAUTION
National safety regulations

Failure to comply with national regulations may result in personal injury and other damage.

  1. Use only copper conductors. Connect the device in accordance with local, state, and national electrical codes and regulations.