Connecting to an LPB-bus - Installation - CWG.BOX-A - CWG.BOX-EU - CWG.BOX-NA
CWG.BOX Connect Box Installation
- Product Family
- Content Language
- English
- Content Type
- Technical Documentation > Installation Instructions
- Document No
- A6V13606287_en
- Download ID
- A6V13606292
- Stock No.
- S55813-Y100
- S55813-Y110
- S55813-Y120
- Product No.
- CWG.BOX-A
- CWG.BOX-EU
- CWG.BOX-NA
- Access level
- Internet
- File Type
- html
Connecting to an LPB-busOne or more devices
- Connect the LPB-bus to the X-bus terminal.
- For each device, connect the MB cable to the X-bus (-) connector and the DB cable to the X-bus (+) connector.
Configure the protocol online
- Turn off the LPB-bus during installation. Turn it back on after installing.
- Configure a unique segment address for each device (from 1 to 14).
- Physically connect the device and configure it at https://connectbox.siemens.com.
- Designate only one device as the one that powers the bus.