Connecting to a BACnet IP network - Installation - CWG.BOX-A - CWG.BOX-EU - CWG.BOX-NA

Single or two devices / networks

• An additional Ethernet cable is required

1. Connect the cable to Ethernet port ETH1 or ETH2.
   

2. Connect the other end of the cable to the device.

3. Ensure that either LED ETH1 or ETH2 is on.

Three or more devices

• An additional Ethernet cable and an Ethernet switch are requires

• Connections to devices also require separate Ethernet cables

• Connect the switch to the same or a separate power supply.

1. Connect an Ethernet cable to Ethernet port ETH1 or ETH2.
   

2. Connect the other end of the cable to the Ethernet switch.