CAUTION
Electrical voltage
Electric shock
- Disconnect all lines from the power supply before starting any installation work.
1 | Slot I, extension card | 4 | GPI inputs |
2 | Slot II, extension card | 5 | Relay outputs |
3 | Power supply DC 24 V | 6 | FDnet/C-NET detector line |
- Housing cover has been removed. See 'Removing the housing cover'.
- Guide the cables through the cable entries into the housing.
- Break out the required cable entry either on the side or the top.
- The cable entry on the back is open.
- Insert the cables into the push-in connectors in accordance with the connection diagram.