Adding a new configuration

To add a new BLN configuration in Apogee P2 Ethernet Connector, carry out the following instructions:

  • You know the BLN name
  • You know the configuration details for each of the nodes you want to use
  1. Go to Connectors.
  1. Open the Apogee P2 Ethernet Connector.
  1. Go to Network configuration.
  1. Select Add network.
  • The BLN configuration dialog opens.
1234
  1. Enter the BLN name (1).
  1. Provide the IP address, Port, Panel name, and User logon of the first node you want to add (2).
  1. (Optional) If you want to add another node for this BLN configuration, select Add new node (3) and provide its details.
  1. Select Add (4).
  1. Select Update.

Editing existing configurations

To edit an existing BLN configuration in Apogee P2 Ethernet Connector, carry out the following instructions:

  • You have configured at least one network connection
  1. Go to Connectors.
  1. Open the Apogee P2 Ethernet Connector.
  1. Go to Network configuration.
  1. Select More > Edit next to the configuration you want to edit.
  • The BLN configuration dialog opens.
12345
  1. Change the BLN name (1) and details of its nodes (2) as needed.
  1. (Optional) Select Delete (3) to delete individual nodes.
    At least one node must remain.
  1. (Optional) Select Add new node (4) to add another node.
  1. Select Edit (5).
  1. Select Update.