Powered via KNX with a DC 24...30 V auxiliary supply voltage.
When modifying the wallpaper, screensaver (electronic photo album), configurable icons for home page or multi-functional pages with Micro SD card, interrupting
power supply may result in system startup failure.
Make sure the Micro SD card only contains the firmware used for upgrading, otherwise it damages the system.
If the device must be switched off after a setting change, we strongly recommend to cut off power 6 seconds after the change to make sure the changes take effect.
Do not power off the auxiliary supply when upgrading the system via Micro SD card, as this may result in display errors;
system upgrades require
a restart.
Do not power off auxiliary supply when in programming mode, as this may prevent the system from starting.