Freely programmable compact automation station for HVAC and building control systems.

 

  • BTL tested BACnet communication on IP (BACnet/IP and BACnet/SC) or BACnet MS/TP, in compliance with the BACnet standard including B-BC profile
  • 24 inputs / outputs: 2 digital inputs, 8 universal inputs / outputs, 8 super universal inputs / outputs, 6 relay outputs
    Extendable via TXM-I/O modules
  • Modbus TCP/RTU and BACnet MS/TP
  • The following functions are available with KNX PL-Link bus:
    • Communication with RDG2..KN room thermostats, sensors, and operator units
    • Plug-and-play connection of Siemens field devices with KNX PL-Link
  • Integration of wired M-bus meters via RS485 level-converter or onboard M-bus interface (EN 13757-2):
    • Offline and/or online engineering with ABT Site. No additional M-bus tool required
    • Primary and/or secondary device addressing
  • IT security including HTTPS, IEC-62443 4-2 (Security Level 2), and BACnet Secure Connect. For PXC5.E24-N, the certification for IEC-62443 4-2 is currently pending.
  • BACnet Secure Connect support as BACnet/SC hub
  • Supports the flexible use of the Ethernet ports with the activation of the WAN port starting from device version 1.6 onwards.
    • Allows the separation of secure and unsecured networks.
    • Each port receives a separate MAC address resulting in higher security (not applicable for existing devices, only for new devices).
  • IEEE 802.1X port-based authentication with EAP-TLS method requiring mutual authentication with digital certificates between the authentication server (RADIUS) and the supplicant (PXC5)
  • Integration of Modbus data points via RTU and / or TCP
  • Integration of BACnet MS/TP devices
  • WLAN interface for engineering and commissioning (PXC5.E24-N has no WLAN interface)
  • Dual-stack IPv4/IPv6 support to handle both IPv4 and IPv6 protocols simultaneously.
  • Operating voltage AC or DC 24 V
  • Mounted on standard rails or on the wall
  • Plug-in screw terminal blocks
  • Direct cloud connectivity with Building X for remote access, data points time series, and data points commanding (changing state, writing setpoints, commanding outputs, etc.). BACnet alarms are forwarded to the cloud with automatic notifications via e-mail or SMS.

 

Type

PXC5.E24

PXC5.E24-N

Order number

S55375-C104 1)

S55375-C154 1)

Number of inputs and outputs (Onboard)

24

     Number of digital inputs (DI)

2

     Number of universal inputs and outputs (UIO)

8

     Number of super universal inputs and outputs (XIO)

8

     Number of relay outputs (DO)

6

Number of inputs and outputs (Onboard + TXM)

up to 80

Total number TXM-I/Os and integration DPs

up to 120 2)

Number of BACnet MS/TP devices in a field level network

up to 120 3)
(2 x 60)

Number of KNX PL-Link devices

up to 64

Number of configurable field level networks per RS485 (either for Modbus RTU, BACnet MS/TP or M-bus level converters with maximum of 250 meters each)

2

Number of M-Bus meters wired via level converters (RS485) 4)

2 x 250

Number of BACnet/SC devices as a BACnet/SC hub

up to 100

Building X cloud connectivity

Yes

Number of data points on Building X (active data points per device)

400

1) For details on engineering, see PXC4, PXC5 & PXC7 Planning overview (A6V13054435).

2) KNX PL-Link data points do not count as integration points. For KNX PL-Link, only the limits on BACnet objects are considered.

3) Depending on the behavior of the third-party MS/TP devices.

4) The limitation is given by the maximum number of integration data points and maximum number of BACnet objects.

For more information about PXC5.E24 automation stations, refer to the data sheet A6V13187283.

For more information about PXC5.E24-N automation stations, refer to the data sheet A6V13455548.