Follow the below steps to create the Danalock lock:

  1. In the left navigation pane, click Configuration > Locks.
  1. Click Add.
  1. In the Vendor field, click to view the drop-down list and select the vendor Danalock.
  1. In the Lock type field, click to view the drop-down list and select the type V3 Smart Lock or V3 Universal Module as per the requirement.
  1. Enter the MAC address of the lock. NOTICE! The MAC address must be alphanumeric with lowercase letters and the length of 17 characters (for example, 01:02:03:ab:cd:ef).
  1. In the Lock status field, click to view the drop-down list and select the status Enrolled or Uncommissioned or Ready.

Enrolled: The lock is calibrated and installed to the door.

Uncommissioned: The lock is not calibrated and installed to the door.

Ready: The lock is neither Enrolled nor Uncommissioned.

  1. Click Save.
  • If lock is assigned to a door, the lock status displays as Assigned to a door. If lock is not assigned to a door, the lock status displays as Not assigned to a door.
  • The Battery status displays as Low, Medium or High.
  • The Danalock lock is created.