For detailed mounting instructions, see Mounting instructions.

For detailed environmental conditions, see Data sheet.

  • The device is designed for wall mounting, flush mounting and tape mounting.
  • Install in indoor environments (device is not suitable for outdoor use); do not install in recesses, behind curtains, above or close to heat sources or shelves and not on walls where a chimney is located. Do not expose the unit to spot lights or direct sunlight.
  • Do not install the device in a cabinet or metal container.
  • Install the sensor in the occupied space about 1.5 m above the floor, at least 20 cm from the next wall.
  • Seal the end of the conduit at the sensor to prevent false measurements caused by draughts through the conduit.