The USB dongle is inserted into the USB port at the top of the gateway. A WAN cable can be connected simultaneously. However, wired Ethernet always has higher priority than a USB dongle in the OS.
- Connect a PC over a LAN cable to port 1A or 1B on Connect X200.
- Connect the dongle to USB port to the USB port.
- The WWAN0 interface will be created if an internet connection exists. If 4G connection fails and the WAN port is connected to a wired network, the system will try to connect via WAN0.
- To ensure a proper connection, check the following indicators:
- On Connect X200, the CLOUD LED is steady blue when an internet connection to the cloud has been established. If LED status changes from steady blue to flashing, an error has occurred.
- On the local device UI, the interface WWAN0 is displayed as WWAN under Network > Route.
- The cloud connectivity state Connected is displayed.
