The devices can be configured with ABT Go version 4.1 or higher.
- Full configuration with ABT Go: If the address is invalid (255) or not unique, the full configuration with ABT Go is recommended. For access, either the USB connection or the Device Access Point can be used. The address and other parameters can then be set to the definitive values at runtime without restart. To configure, go to "Commissioning > Modbus server configuration".
Overwriting the bus configuration with ABT Go uses a timeout. If "1 = Load" is not written into Reg. "Command" (address 2) within 30 seconds, all values are discarded.