In Energy Manager you can filter sites in the Dashboard or in the Site details pages. You can filter by:
- buildings or campuses
- an individual site
- multiple sites (not possible for Site details)
- according to building type
Filtering buildings or campuses
To filter data by buildings or campuses, carry out the following instructions:
- Select Dashboard, Site details or Emissions in the vertical navigation.
- Select the Sites filter (2).
- The Filter by window opens.
- Open the Buildings/Campuses (1) dropdown list and select the desired option.
- Select Apply (3).
Filtering sites and their types
To filter data by specific sites, carry out the following instructions:
In Dashboard, you can select multiple buildings or multiple campuses at the same time. This feature is not available in the Site details page where only single item selection is supported.
- Select Dashboard, Site details or Emissions in the vertical navigation.
- Select the Sites filter (1).
- The Filter by window opens.
- Open the Buildings/Campuses (2) dropdown list and select the desired option.
- Effective building performance analysis requires comparison of similar building types. Building types are to be assigned using the Devices or Data Setup apps. Apply the Building type filter (3) to narrow down your selection.
- Select a site in the location tree (4) or on the map (5).
Use Search field to aid your selection. Type in the name of the site or use the search criteria.
- Select Apply (6).
Removing site filter
The site filter can only be removed in the Dashboard.
To remove the site filter, carry out the following instructions:
- The Dashboard is filtered by an individual or multiple sites.
For more information, see Filtering sites.
- Select Dashboard in the vertical navigation.
- Go to the Sites filter and select Remove filter at the bottom-right corner of the window.