The widget available under Site details shows the total consumption, costs, or CO2 emissions for the selected site.

The horizontal bar graph displays a visualization of the total value with the budget as a vertical line (if activated). While the budget is not exceeded, the widget shows the vertical budget line always at 80% of the whole bar. The color of the total consumption bar varies depending on whether the consumption is within the budget (green), ten percent or closer to reaching it (yellow) or has exceeded it (red).

The chart displays the monthly consumption, cost or CO2 emissions. If enabled, the values for previous years are displayed. The chart type can be switched between Line chart and Bar chart. To exclude a consumption group from the displayed data, select the corresponding circle beneath the bar chart.

The pie chart visualizes how individual consumption groups contribute to the total consumption, costs, or CO2 emissions. The pie chart has two layers: The outer layer displays consumption groups expressed in units of energy, the inner layer consumption groups in volume units.

If consumption is selected, the chart may contain two separate bars - for unit of energy (left bar) and volume (right bar) depending on the displayed consumption groups.

Select the More button to access the following settings and actions:

  • Expand the widget.
  • Data:
    • Change the data type or follow the dashboard settings.
    • Switch between Absolute and Relative calculation.
    • Change the data calculation: Show the Measured values or select one of the Weather-adjusted calculation methods.
    • Activate the Budget to display the vertical line to mark the budget in the horizontal bar graph.
    • Activate the Year-on-year comparison to display a bar or line for each year to compare values for different years.
    • Activate the Cumulative calculation mode, to display the accumulated values for the displayed period.
  • View:
    • Switch between Bar chart and Line chart.
    • Choose Stacked columns or Aggregated columns.
    • Select the interval for the data aggregation.
  • Tools:
    • Create notification rules.
    • Create a report.
    • Export the widget data as CSV, XLSX, PDF or PNG.
See also