The following parameters are used to set the "Send switching status/binary value” function:
Parameters of the “functions, objects” parameter card
As a prerequisite for the "Send switching status/binary value” function, set the "Function channel” parameter on the "functions, objects” parameter card as specified:
Function channel
Parameter | Settings |
---|---|
Function channel | Send switching status/binary value |
Function:
This parameter determines which function is to be assigned to the channel.
Availability:
The "Function channel” parameter is displayed when the following configurations have been made:
- Parameter "Function channels A + B” on the "device settings” parameter card
- Setting: “Single”
More information:
Parameters of the “send switching state” parameter card
Switching value, if switching status on
Parameter | Settings |
---|---|
Switching value, if switching status on | No action Off On Toggle |
Function:
This parameter is used to set which switching value is to be sent when switching state = “On."
The following settings are possible:
- No action:
When the switching state changes to “on", no telegram is sent. - Off:
When the switching state changes to “on,” the switching value “OFF” is sent. - On:
When the switching state changes to the switching state “on", the switching value “on” is sent. - Toggle:
When the switching state changes to “on", the last sent switching value is inverted and the new value is sent. If there are several switches with the same group address, it does not matter from which switch the last value was sent.
Availability:
The "Switching value, if switching status on” parameter is displayed when the following configurations have been made:
- Parameter "Function channels A + B” on the "device settings” parameter card
- Setting: “Single”
- Parameter "Function channel” on the “functions, objects” parameter card
- Setting: “Send switching status/binary value”
More information:
Switching value, if switching status off
Parameter | Settings |
---|---|
Switching value, if switching status off | No action Off On Toggle |
Function:
This parameter is used to set which switching value is to be sent when switching state = “Off."
The following settings are possible:
- No action:
If the switching state changes to “off,” no telegram is sent. - Off:
When the switching state changes to “off,” the switching value “off” is sent. - On:
When the switching state changes to “off,” the switching value “on” is sent. - Toggle:
When the switching state changes to “off,” the last sent switching value is inverted and the new value is sent. If there are several switches with the same group address, it does not matter from which switch the last value was sent.
Availability:
The "Switching value, if switching status off” parameter is displayed when the following configurations have been made:
- Parameter "Function channels A + B” on the "device settings” parameter card
- Setting: “Single”
- Parameter "Function channel” on the “functions, objects” parameter card
- Setting: “Send switching status/binary value”
More information:
Send value on change of value
Parameter | Settings |
---|---|
Send value on change of value | disable enable |
Function:
This parameter determines whether the switching value is sent when the value changes.
The following settings are possible:
- disable:
With this setting, the switching value is not sent automatically when a change is made. - enable:
With this setting, a telegram with the new switching value is sent when the switching value has changed.
Availability:
The "Send value on change of value” parameter is displayed when the following configurations have been made:
- Parameter "Function channels A + B” on the "device settings” parameter card
- Setting: “Single”
- Parameter "Function channel” on the “functions, objects” parameter card
- Setting: “Send switching status/binary value”
More information:
Send value on request
Parameter | Settings |
---|---|
Send value on request | disable enable |
Function:
This parameter is used to set whether the switching value is sent on request or whether requests to send the switching value are rejected.
Availability:
The "Send value on request” parameter is displayed when the following configurations have been made:
- Parameter "Function channels A + B” on the "device settings” parameter card
- Setting: “Single”
- Parameter "Function channel” on the “functions, objects” parameter card
- Setting: “Send switching status/binary value”
More information:
Send value cyclically
Parameter | Settings |
---|---|
Send value cyclically hh:mm | 00:00 ... 23:59 |
Function:
This parameter can be used to set the time interval at which the switching value object is sent cyclically. If this is set to “00:00:00,” cyclic sending is deactivated.
Availability:
The "Send value cyclically” parameter is displayed when the following configurations have been made:
- Parameter "Function channels A + B” on the "device settings” parameter card
- Setting: “Single”
- Parameter "Function channel” on the “functions, objects” parameter card
- Setting: “Send switching status/binary value”
More information:
Filter (cyclically sending)
Parameter | Settings |
---|---|
Filter (cyclically sending) | Send On and Off Send only On Send only Off |
Function:
This parameter can be used to set which values are sent cyclically.
The following settings are possible:
- Send On and Off:
With this setting, the switching value is always sent cyclically, regardless of whether the switching value is “on” or “off." - Send only On:
With this setting, the switching value is sent cyclically when the switching value is “On." If the switching value is “off", the switching value is sent once, but not cyclically. - Send only Off:
With this setting, the switching value is sent cyclically when the switching value is “Off." If the switching value is “On,” the switching value is sent once, but not cyclically.
Availability:
The "Filter (cyclically sending)” parameter is displayed when the following configurations have been made:
- Parameter "Function channels A + B” on the "device settings” parameter card
- Setting: “Single”
- Parameter "Function channel” on the “functions, objects” parameter card
- Setting: “Send switching status/binary value”
- Parameter "Send value cyclically” on the "send switching state” parameter card
- Setting: greater than 0
More information:
Send additional telegram
For details on the "Send additional telegram” function, see Send additional telegram