Open test plan

  1. Select Test .
  • The Test plans dialog box opens.
  1. Select a new test plan.
  1. Select Open.
  • The Activate test mode dialog box opens.
  1. Select Start testing.
  1. Select View Instructions.
  • The Instructions dialog box opens.
  1. Select Continue.
  1. Select Resume testing.
  • The current detector data are read into the test plan.
  1. Continue with Run Testing.

Continue test plan

  1. Select Test .
  1. Select a previously edited test plan.
  1. Select Resume.
  • The Test Plan Progress dialog box opens.
  1. Select Resume testing.
  • The current detector data is updated in the test plan.
  1. Continue with Run Testing.

Run testing

  • A test plan with state Open or Resume is open.
  1. Select Resume testing.
  1. Select Filter and select an option:
  • Failed
  • Skipped
  • Pass
  • Not tested
  1. Select Filter.
  • The detector list is filter by Not tested.
  1. Select a detector from the list.
  • Detector details are displayed.
  1. Select Digital input.
  • Select option Failed or Skipped .
  1. Select Comment .
  • Select a predefined text or enter your own text under Other.
  1. Select Save, followed by < Back.
  1. Test other detectors or select Stop Testing.
  • The Finish Test dialog box opens.
  1. Select an option:
  • Finish Test closes the test plan; it can no longer be opened.
  • Interrupt Test interrupts testing; can be continued later.