Configuring the Read/Write Schedule Path and Frequency - User Guide

Once reading and/or writing have been enabled, the popup will display the next set of configuration options.

Read Path This will display the object instance of the selected schedule point. If the user wants to read from a different schedule than the write, they can change it here.

Read Frequency: This frequency, defined in minutes or hours by the user, determines how often the reading sync occurs. This process is based on polling. If the schedule does not require frequent changes, we recommend using a slower frequency. This is applied to the connector with the tag bacnetSchedu1eReadFreq and all associated schedule points.

Write Path: This will display the object instance of the selected schedule point. If the user wants to write to a different schedule than the read, they can change it here.

NOTICE! Write sync will only occur when there is change in the FIN schedule. This will sync the weekly exception and default properties.

Write Level: This is the priority level in which to write to on the schedule object instance in the device side.

The schedule record varies according to the different configuration settings:

scheduleRef
reading:

bacnetScheduleRead
writing:

bacnetScheduleWrite
bacnetScheduleWriteLevel

Additional Read Sync details