Storage
- Store in its original packaging, protected from shocks.
- Store in a clean and dry location, protected from bad weather.
Inspection
- Check that the product is in good condition.
- Check that each fitting has been properly tightened using the appropriate wrench. Re-tighten if necessary.
- If there is a leak, tighten the fittings or replace the pressure reducer.
The product must be inspected as often as required by applicable local regulations. For more information, refer to the maintenance documentation.
Every 10 years
- Siemens recommends replacing the pressure reducer with a new product.
Replace more frequently if so required by local regulations or environmental conditions.