Storage

  • Store in its original packaging, protected from shocks.
  • Store in a clean and dry location, protected from bad weather.

Inspection

The frequency of the product inspection is subject to applicable local regulations. For more information, refer to the maintenance documentation.

  • Check the good condition of the product.
  • Check that each fitting has been properly tightened using the appropriate wrench. Re-tighten if necessary.

Refer to the mounting and maintenance instructions to obtain the detailed procedure.

After an actuation

  • Unscrew the actuator from the cylinder valve.
  • Replace the cylinder.
  • Move the cap of the EL valve actuation port from the full to the empty cylinder.
  • Fit the actuator to the EL valve actuation port, on the full cylinder.
  • Connect the cable.

Only use actuators in good condition.