Storage
- Store in its original packaging, protected from shocks.
- Keep in a dry, dust-free location.
Inspection
The product must be inspected as often as required by applicable local regulations. For more information, refer to the maintenance documentation.
- Check that the product is in good condition.
- Check that all fittings have been properly tightened, using a 14 mm open-end wrench. Re-tighten using the wrench if necessary.
- Wipe the pressure gauge dial using a clean, lint-free cloth.
Removing the pressure gauge
The contact pressure gauge is designed to be fitted and removed safely when the cylinder is pressurized.
WARNING
A slight "plop" noise can be heard when removing the pressure gauge attached to a pressurized cylinder
Remove the manometer carefully.
Refer to the mounting and maintenance instructions to obtain the detailed procedure.