Storage

  • Store in its original packaging, protected from shocks.
  • Store in a clean and dry location, protected from bad weather.

Inspection

  • Check that the product is in good condition.
  • Check that each fitting has been properly tightened using the appropriate wrench. Re-tighten if necessary.
  • Check that the product is mounted in the correct direction: the arrow must point toward the manifold.

The product must be inspected as often as required by applicable local regulations. For more information, refer to the maintenance documentation.

After an actuation

  • Check that the product is in good condition.
  • Check that each fitting has been properly tightened using the appropriate wrench. Re-tighten if necessary.