Contractual documents

Your company must sign a Master Order Form for Digital Services with your local Siemens entity to use the service. The Master Order Form forms, as the specification for this service as well as any additional appendices to the same, an integral part of the Digital Service Agreement (DSA) together with this Product and Service Data Sheet (PSDS). The documents listed below together form the contractual documents for the service.

Subscription

A valid subscription, i.e., ordered and accepted in accordance with the Master Order Form, is required to use the service.

Supported hardware devices

The service is currently only compatible with Siemens hardware devices, available commercially and listed below. A connected device must be purchased and installed on premise at a site specified by you to implement the service. You are responsible for installing the Cloud-enabled devices at the site and any associated costs to perform said service in accordance with related documentation for the device.

 

List of supported hardware devices

Connect X200

Connect X300

The Connect X200 is DC 24V or AC 24V and may require an enclosure.

The Connect X300 is DC 24V and may require an enclosure.

The Connect gateway includes embedded software (for example, firmware and factory installed applications collectively referenced herein as Connect Software) to provision building equipment data to this service.

Desigo PXC4.E16, PXC5.E003 and PXC7.E400

PXC is powered with AC 24V and PXC includes embedded firmware (V2.09 or higher) and ABT Site (V4.0 or higher) to use the service.

Intelligent Valve

Intelligent Valve is powered with AC 24V and includes embedded firmware (MR3 or higher) to supply valve control device data to this service, depending on the configured application.

Web browser and viewing devices

Chrome and Firefox are recommended to use the service, but other standard browsers might also serve this function. Screen resolution of 1920x1080 pixels or higher is recommend for best user experience.

Internet connection

Service performance is based on the Internet bandwidth. A recommended speed of at least 25 Mbps is recommended for best user experience.