The Port Enabling tab allows you to enable or disable ports on your controller and displays information about a device's ports.

A port that is both Connected and True is in use. If a port can be disabled and you attempt to disable it, you will receive a notification that requires you to confirm or cancel the action before proceeding.

Setting

Description

Device Label

Name of the port connection.

Link State

Link state of the hardware network.
Connected indicates the port is physically connected to your computer.
Disconnected indicates the port is not physically connected to your computer.
NOTE: This setting is not available on PXC4 devices.

Enabled

Usage status of the port.
True indicates that the port is in a state where it can be used.
False indicates that the port is in a state where it cannot be used.
NOTE: The lan0 or eth0 should always be True.