The Auto-Discover button locates devices connected to the network.
- Selecting the Auto-Discovery Button
- The page redirects to a prompt as shown below:
- Select on Start Discovery.
If the user wants to make changes to the device discovery settings, they will need to do the following:
1) Open DB Builder.
2) Navigate to the Connector Tree > BACnet > Discover and select the Discover Setting Button.
.
> The screen will redirect to a prompt where settings for the device discovery can be changed.
- Once selected the user will be shown a list of connectors, from which they can multi-select and add connectors to the template.
Auto-Discovery sorting and search functions
At the top of each column to the right of the data label, you will see a set of up/down arrows and a magnifying glass.
Sorting: Select the arrows to sort devices in ascending or descending order for columns with numerical values such as dis, host, mac address, and connPingFreq..
Search: The magnifying glass icon allows users to search under each category for device labels containing specific character strings. 
- When the user has finished selecting their connectors, on the bottom right bottom highlighted in blue, Select Devices opens a new prompt which will display the following:
- To close, select OK or allow the prompt to time out.