The startup point to any KNX configuration is defining the KNX topology of one or several installations using the ETS tool, which can be downloaded from the KNX Association website (http://www.knx.org ).
Here’s a sample project opened in ETS, showing the network topology, group addresses and the diagnostics/monitoring views:
After creating and configuring a KNX project, a *.knxproj file will be available and can be imported into FIN.
To upload a *.knxproj file into a FIN project, go to FIN System Integrator Apps -> DB Builder -> Connectors -> Knx -> Projects, click on the Upload button and select a *knxproj file.
In the same view, there are options to Replace or Delete the uploaded *knxproj file. When uploading a *knxproj file into a FIN project, that file is available for all Knx connectors created under that FIN project.
You will see a checkbox on the KNX project file form that should be selected if your knxproj file is password protected. Once selected, another form will prompt users to enter a password. Incorrect passwords will prompt an error message.
Once these steps are successfully completed, users should be able to assign the knx proj to a knx connector before expanding and learning from that connector in the KNX tree.
