This procedure outlines the steps required to update the BACnet Cur from Tag using the provided script within the system, allowing users to synchronize points with the Template database using specific naming conventions.

NOTICE! It is recommended to run the script during off-peak hours to minimize the impact on system performance.

NOTICE! Document any anomalies or issues encountered during the procedure for future reference.

Prerequisites:

  • Ensure you have the necessary permissions to run the script.
  • Verify that the system is operational and that you have access to the relevant user interface.
  1. To initiate the update process, navigate to the main interface and click on the “Update Bacnet Cur from Tag” button.
  1. Next you will select and configure the filter for your template. NOTICE! Observe that the default selection and filter are applied automatically. To change the filter or selection criteria, click on the drop-down menu adjacent to the selection field. Choose the desired filter and selection from the drop-down options.
  1. To connect points with the Template database, you will run the script to Running the Script using the following naming convention: For real names with display names, use: realName + dis. For real names with descriptions, use: realName + description.
  • This naming convention will yield better results for point synchronization.

Upon execution of the script, watch for any messages that may appear; these messages could be indications of success, warnings, or failure notifications.

Success Message: If a success message appears, no further action is needed.

Warning Message: If a warning message is displayed, review the details of the warning and proceed with caution. Consult the system documentation or support team if necessary.

Failure Message: In case of a failure message, do not proceed. Document the error message and contact technical support for assistance.

End of Procedure: The procedure has terminated.