Indicates there are notifications.
“At home” mode is on.
“AWAY” mode is on. You must manually tap to activate this mode.
Displays when the system works in an energy-optimized mode. If the leaf is red, it means that some pre-defined settings have been changed. You can tap the red leaf to restore to the energy-saving mode. The leaf turns green again.
Temperature setpoint slider. The background color of this icon changes along with major changes to the setpoints:
Relative room humidity
The thermostat works following a schedule. If you haven’t set one, the thermostat works following a default schedule. This default schedule could be set by the system, or specified by yourself if you have changed the default setpoints of some operating modes under “Advanced Settings” > “Optimization”.
When this icon is toggled on, temperature setpoint changes can only be maintained within the current scheduled mode and will be overridden to the scheduled setpoint when the next scheduled mode starts.
NOTE: If the thermostat has never been connected to a WLAN network, it cannot read the real time from the network and thus cannot follow a schedule. In this case, it always works under the “Comfort” mode.
The thermostat doesn’t work following a schedule. All of your temporary setpoint changes work continuously if this icon is toggled on.
Tap to display options, such as “Operating mode”, “Settings” and “Advanced Settings”.
Indicates that room air quality is good.
Indicates that room air quality is okay.
Indicates that room air quality is poor.