Connecting to a WLAN network allows you to connect to the cloud server and control your thermostat from a smartphone. Two network connection types are available for you to choose in the setup wizard:

  • If the thermostat is installed at your own space, “Private WLAN” is recommended. Choosing it means that the thermostat is connected to your own WLAN network. You need to choose and manage your password. In the thermostat, you need to go to “Settings” for WLAN connection management.
  • If the thermostat is installed in a public space, “Administrated WLAN *” is recommended. Choosing it means that the thermostat is connected to the facility WLAN network. The password is provided by the facility managers and is under their control. In the thermostat, go to “Advanced Settings” for WLAN connection management.

See the Quick guide for guidance to the setup wizard. You must perform a factory reset if you want to change the network connection type after you’ve set up the thermostat following the wizard. Note that a factory reset erases all user data. See Changing system setup for information about how to perform a factory reset.

Connect to a network

  1. If the thermostat is selected for commercial use, do the following:
  • On the Home screen, tap , then tap . The “Advanced Settings” page displays.
  • If required, enter your administrator password.
  • Tap > , and then wait for the thermostat to discover the networks nearby.
  1. If the thermostat is selected for home use, do the following:
  • On the Home screen, tap , and then tap until the “Settings” page displays.
  • Tap > > , and then wait for the thermostat to discover the networks nearby.
  1. Tap your desired network. If necessary, tap or to scroll through the networks to select one.
  1. For secured networks, enter the relevant password, and then tap “Connect”.

Note: For more information about the administrator password, see Creating an administrator password.

Manually add a network

  1. If the thermostat is selected for commercial use:
  • On the “Advanced Settings” page, tap > , and then tap to scroll down to find and tap “Add Network”.
  1. If the thermostat is selected for home use:
  • On the “Settings” page, tap > > , and then tap to scroll down to find and tap “Add Network”.
  1. Enter the Network name (SSID) information.
  1. To select a security type, tap the “Security” field.
  1. Tap “Connect”.
  1. When prompted, enter the relevant password, and then tap “Connect”.

Configure current network settings

  1. If the thermostat is selected for commercial use:
  • On the “Advanced Settings” page, tap > . Your current network displays on the screen.
  1. If the thermostat is selected for home use:
  • On the “Settings” page, tap > > . Your current network displays on the screen.
  1. Tap “Network Settings”. The default DHCP (Dynamic host configuration protocol) setting page displays on the screen.
  • Tap to scroll through and view other network DHCP settings like “Preferred DNS”.
  • Note: To customize the current network settings, tap “Manual”, select a field, or tap or to scroll to the desired field, and then enter a new setting.
  • Tap again to enter “Advanced Bacnet setting” page. You can manually change the BACnet ID or enable/disable a foreign device. You can also modify BBMD related information if a foreign device is enabled.

Connecting to a network via push button

If you have little knowledge about wireless security, using the push button method makes it easy for you to establish a secure wireless network connection. If you want to use this method, you must have a WPS (Wi-Fi Protected Setup) compatible router.

Connect to a network using the push button

  1. If the thermostat is selected for commercial use:
  • On the “Advanced Settings” page, tap > , then tap until you see “Push Button Setup”.
  1. If the thermostat is selected for home use:
  • On the “Settings” page, tap > > , then tap until you see “Push Button Setup”.
  1. Tap “Push Button Setup”, and then press the WPS button on your WPS-supported router to start the discovery of your thermostat.
  1. On the thermostat, tap > “Connect”.
  1. Tap “OK” once the thermostat is successfully connected to the network.