You can log in to Building Operator Discovery remotely, or locally. The instructions below outline how to log in remotely. To log in locally, use a local port or network cable. A remote access session will close after one hour, even if you are actively working.

  1. Select the site you want to log in to.
  1. Go to Remote Web Access.
  1. Find Building Operator Discovery and click Open.
  1. Wait for the connection to verify.
  1. A new tab will open in the browser. Log in using the following credentials (case-sensitive):
  • Username: admin
  • Password: admin
  1. (Recommended) After you first log in to Building Operator Discovery, you may want to create a more secure password. Find and select the username drop-down in the top-right corner, then select Change Password. Complete the fields from the pop-up and select Apply.
  1. Once you’ve created a more secure password, find and select Open Project.
  1. A new tab will appear. Select the menu icon in the top left of the screen.
  1. Select DB Builder.

If the remote access session is interrupted, select Disconnect in Operations Manager. Start the Remote Web Access process again.