An LCD display and capacitive buttons to operate HVAC room functions are located on the top half of the device. The HVAC functions are selected and operated on buttons 1 through 8. The Green Leaf (green/red leaf) is located in the upper right-hand corner on button 5.
Figure: Configurable displays on the QMX3.P37 display
Displays
The following displays can be configured:
- Window contact state
- Present measured room temperature or outside temperature
- Present measured room humidity (requires a separate humidity sensor in the room)
- Present measured room air quality in ppm or clear text (requires a separate air quality sensor in the room)
- State heating/cooling
- Present setpoint for room temperature relative or absolute in °C
- Present fan stage
- Present operating mode for room
- Display of present displayed data (temperature, humidity, or air quality)
- Present room occupancy
Operation
The following operating elements can be configured to be available to the room user:
|
| Green Leaf operation |
Room setpoint. | Room setpoint. | |
Fan stage operation |
| |
Select display | Operation of presence control or temporary Comfort extension |
