Performing Commands
You can send pre-configured commands to subsystems directly from the workstation. A distinction is made between pre-configured commands and commands which Siveillance Control receives directly from the subsystem.
- Either the Engineering or Event/Messages perspective is displayed.
- You can select several detectors or detector groups and perform commands by using multi-selection. In order to perform commands, detectors or detector groups need to have the same data point type and to be listed under the same component. There are several possibilities to perform commands:
- In the Location Tree, right-click one or more detectors or detector groups and select Perform Command > [Command].
- In the System Tree, right-click one or more detectors or detector groups and select Perform Command > [Command].
- In the System State List view, right-click one or more detectors or detector groups and select Perform Command > [Command].
- In the graphic, right-click one or more detectors and select Perform Command > [Command].
- To restrict rights of the specific user group on performing commands for a specific object type, refer to: Creating Simple Permission Rules.
Performing Subsystem-Specific Commands
You can send commands to subsystems directly from the workstation. These commands are received directly from the subsystem.
- Either the Engineering or Event/Messages perspective is displayed.
- You can select several detectors or detector groups and perform commands by using multi-selection. In order to perform commands, detectors or detector groups need to have the same data point type and to be listed under the same component. There are several possibilities to perform commands:
- In the Location Tree, right-click one or more detectors or detector groups and select Perform Command > More Commands > [Command].
- In the System Tree, right-click one or more detectors or detector groups and select Perform Command > More Commands > [Command].
- In the System State List view, right-click one or more detectors or detector groups and select Perform Command > More Commands > [Command].
- In the graphic, right-click one or more detectors and select Perform Command > More Commands > [Command].
- To restrict rights of the specific user group on performing subsystem-specific commands, refer to: Creating OIS Commands Permission Rules.