MANOCAB range
- Plug the female M8 connector into the free connector at the back of the pressure gauge.
- Tighten the connector nut to the required torque: 0.2 Nm.
Refer to the mounting and maintenance instructions to obtain the detailed procedure.
MANOEOL range
- Plug the female M8 connector into the free connector at the back of the last pressure gauge on the monitoring line.
- Tighten the connector nut to the required torque: 0.2 Nm.
Refer to the mounting and maintenance instructions to obtain the detailed procedure.
MANO-AH testing tool
- Connect the testing tool in any place of the monitoring line between the MANOCAB-START connection cable and the MANOEOL end-of-line device.
- Press the button to simulate a pressure gauge indicating a "loss of agent".